A manual processing master’s skill is not exquisite also directly affects the prototype assembly, and prototype appearance problems, including prototype some small details grasp!
Manual processing is actually the first step of CNC post-processing process, mainly including the following steps:
1. Remove burrs: after CNC machining, there are a lot of burrs around the handplate, which can be cleaned by gently winding the surrounding area with a triangle knife. Of course, nylon and other tough materials burrs are difficult to deal with, which affects the appearance.
2. Check the size: the manual is the first inspection of the size of the hand plate. If there are unqualified products, they can be redone directly to the CNC.
3. Bonding: some dimensions are too large beyond the processing scope of the machine or the structure is complex and difficult to process in place, the hand-plate factory generally choose to do disassembly, manual this step requires these disassembly according to the drawing to stick back to the original, to pay attention to it must be glued flat and seamless, otherwise it will affect the size of the hand-plate, appearance and assembly!For this, believe a lot of handcraft master or very experienced
4. Assembly: generally speaking, the assembly is divided into two steps. The first step is the assembly after the CNC is brought to the white board.This process can also timely find the design of the defects, and at any time to communicate with the customer!The second step is manual reinstallation after the completion of oil injection handplate: in fact, manual here as long as the handplate components for recombination, a beautiful handplate model is basically completed!
Kaierwo is a custom prototyping service factory in China, Established in 2002, Own r&d team, You can get products 30% cheaper than US/EU, Contact us Now！